High Resolution Genome Wide Binding Event Finding and Motif Discovery Reveals Transcription Factor Spatial Binding Constraints. Yuchun Guo, Shaun Mahony & David K Gifford, (2012) PLoS Computational Biology 8(8): e1002638.
Deciphering the language of transcription factors (MIT News article on the GEM paper).
GEM is a Java software for studying protein-DNA
interaction using ChIP-seq/ChIP-exo data.
GEM links binding event discovery and motif discovery with positional priors in the context of a generative probabilistic model of ChIP data and genome sequence, resolves ChIP data into explanatory motifs and binding events at unsurpassed spatial resolution. GEM reciprocally improves motif discovery using binding event locations, and binding event predictions using discovered motifs.
GEM has following features:
See an example of GEM output for ES cell Sox2 binding, including binding events, K-mer Set motifs (KSMs), PWM motifs, and motif spatial distribution plots.
- Exceptionally high spatial resolution on binding event prediction (aka peak calling)
- Highly accurate de novo motif discovery
- Resolve closely spaced (less than 500bp) homotypic events that appear as a single cluster of reads
- Enable analysis of spatial binding constraints of multiple transcription factors, for predicting TF dimer binding sites, enhanceosomes, etc.
- Process ChIP-seq or ChIP-exo data, single-end or paired-end
- Run in single-condition mode or multi-condition mode
You need to unzip the downloaded zip file (that it, no installation!), and run from command line similar to the examples shown in this page.
Download GEM software (version 2.4.1) and test data
GEM vs. GPS
GEM is a superset of GPS. GEM uses both ChIP-seq read data and genome sequence to perform de novo motif discovery and binding event calling, while GPS uses only ChIP-seq read data for binding event calling.
GEM can be activated by giving a genome sequence (
--genome) and using any one of the following command line options:
If these three options are not used, GEM will just run GPS and stop.
--k: the length of the k-mers
--k_max: the range for the length of k-mers
--seed: the seed k-mer to jump start k-mer set motif discovery. The length of the seed k-mer will be used to set k.
GEM is a java software. Not installation is required. It works across most of computer systems.
Java 1.6 is required to execute the JAR. For analysis with mamalian genome, GEM requires about 5-15G memory. It can be specified at the command line with the option
-jar -Xmx10G gem.jar allocates 10GB of memory).
read distribution file is required for GEM. The
user can use the default read distribution file provided with the
software as starting point (ChIP-seq default read distribution file ChIP-exo default read distribution file). After one round of prediction, GEM will
re-estimate the read distribution using the predicted events.
read distribution file specifies
the empirical spatial distribution of reads for a given binding event.
The file contains tab-delimited position/density pairs. The first field
is the position relative to the binding position (i.e. binding event is
at position 0). The second field contains the corresponding read
density at that position. For example,
it can be estimated directly from the ChIP-seq data. Given a set of
events, we count all the reads at each position (the 5' end of the
reads) relative to the corresponding event positions. The initial set
of events for estimating the empirical spatial distribution can be
defined by using known motifs or by finding the center of the forward
and reverse read profiles. GEM has a tool to calculate
the read distribution from a user provided file (coords.txt) containing
the coordinates (format chr:coord, e.g. 1:3498832, or chr:coord:strand, e.g. 1:3498832:+, each coordinate on a separate line).
For ChIP-exo data, we suggest
java -Xmx1G -cp gem.jar edu.mit.csail.cgs.deepseq.analysis.GPS_ReadDistribution --g "mm8.info" --coords "coords.txt" --chipseq "SRX000540_mES_CTCF.bed" --f "BED" --name "CTCF" --range 250 --smooth 5 --mrc 4
--smooth 3 --mrc 20.
After GPS/GEM makes the prediction, it will re-estimate the read
distribution using the predicted events.
the data are too noisy or too few events are used for re-estimation,
the new read distribution may not be accurate. The users are encouraged
to examine the read distribution using the plot of read distributions
(X_All_Read_Distributions.png) output by GEM.
Input and output
takes an alignment file of ChIP-seq reads and a genome sequence as input and reports a list
of predicted binding events and the explanatory binding motifs.
ChIP-seq alignment file
Support for some file formats may not be the most updated. If you have an error related to FileReadLoader, please do the following:
ChIP-seq alignment file formats that are supported:
- Send me a few example lines (and the version of the aligner software), I will update it in the next release.
- Convert the read alignment file into BED format, and then try again.
In order to run the motif discovery of GEM algorithm, a genome sequence (UCSC download) is needed. The path to directory containing the genome sequence files (by chromosome, *.fa or *.fasta files, with the prefix "chr") can be specified using option
--genome (for example,
--genome your_path/mm8/). Note that the chromosome name should match those in the "
--g" genome_info file, as well as those in your read alignment file.
For example, the fasta file for chromosome 2 is chr2.fa:
GEM outputs both the binding event files and the motif files.
Because of the read distribution re-estimation, GEM outputs event
prediction and read distribution files for multiple rounds. (See more details)
- GEM event text file (GEM_events.txt)
- K-mer set motifs (KSM.txt)
- PFM file of PWM motifs (PFM.txt)
- HTML file summarizing the GEM event and motif results (see an example and explanations)
- GEM output folder containing more detailed result files (Round 1 and 2 are GPS and GEM results, respectively (See more details))
- GEM event text files (significant, insignificant and filtered)
- K-mer set motifs
- PFM file of PWM motifs
- Read distribution file
- Spatial distribution between primary motif and all the secondary motifs in the 61bp around the GEM events (this is based on PWM motif match, not based on the GEM binding sites). You will have the files such as Name_Spatial_dist_0_1.txt/png showing the spatial distribution of secondary motifs (#1) with respect to the primary motif (#0) in text format or as a PNG image. If you click on the PNG image on the HTML output page, you also get the txt file with the values.
GEM outputs a tab-delimited file (xxx_n_GEM_events.txt ) with following fields:
|Location||the genome coordinate of this binding event|
|IP binding strength||the number of IP reads associated with the event
|Control binding strength||the number of control reads in the corresponding region
|Fold||fold enrichment (IP/Control)
|Expected binding strength||the number of IP read counts expected in the binding region given its local context (defined by parameter W2 or W3), this is used as the Lambda parameter for the Poisson test
|Q_-lg10||-log10(q-value), the q-value after multiple-testing correction, using the larger p-value of Binomial test and Poisson test
|P_-lg10||-log10(p-value), the p-value is computed from the Binomial test given the IP and Control read counts (when there are control data)
|P_poiss||-log10(p-value), the p-value is computed from the Poission test given the IP and Expected read counts (without considering control data)
|IPvsEMP||Shape deviation, the KL divergence of the IP reads from the empirical read distribution (log10(KL)), this is used to filter predicted events given the |
--sd cutoff (default=-0.40).
|Noise||the fraction of the event read count estimated to be noise
|KmerGroup||the group of the k-mers associated with this binding event, only the most significant k-mer is shown, the n/n values are the total number of sequence hits of the k-mer group in the positive and negative training sequences (by default total 5000 of each), respectively
|KG_hgp||log10(hypergeometric p-value), the significance of enrichment of this k-mer group in the positive vs negative training sequences (by default total 5000 of each), it is the hypergeometric p-value computed using the pos/neg hit counts and total counts
|Strand||the sequence strand that contains the k-mer group match, the orientation of the motif is determined during the GEM motif discovery, '*' represents that no k-mer is found to associated with this event
GEM also outputs the list of insignificant events (those do not pass
the statistical test), and the filtered events (those would pass the
statistical test using the read count, but have a low IP/Ctrl ratio, or
the distribution of reads are quite different from the empirical
Optionally, GEM can be set to output BED files (using option
for loading the GEM results to Genome Browser as custom tracks for
visualization. Note that in BED file, the coordinates are offset to
left/right 100bp to give a region for visualization.
can be used to test GEM. It comes from a Ng lab publication (PMID:
18555785) and consists of Bowtie alignments of mouse ES cell
CTCF ChIP-seq and GFP control reads.
Once everything is unpacked, use the following command:
java -Xmx10G -jar gem.jar --d Read_Distribution_default.txt --g mm8.info --genome your_path/mm8 --s 2000000000 --expt SRX000540_mES_CTCF.bed --ctrl SRX000543_mES_GFP.bed --f BED --out mouseCTCF --k_min 6 --k_max 13
Note the double dashes (
--) for GEM parameters.
For ChIP-exo data, use ChIP-exo read distribution
--d Read_Distribution_ChIP-exo.txt, add one more option
--smooth 3 to estimate the read distribution without too much smoothing. Depending on the quality of the data, you may want to turn off the read filtering by option
command line parameters are in the format of
pairs. Note the double dashes (
--); GEM does not accept single dash parameters.
Some parameters are required:
|The path to the read distribution model file
|The path to the aligned reads file for experiment
(IP). X is condition name. In multi-condition alignment mode, X is
used to specify different conditions.
parameters (those relevant to motif discovery are in bold) are optional:
|The path to the aligned reads file for control. X
should match the condition name in
|Read file format: BED/SAM/BOWTIE/ELAND/NOVO. The
SAM option allows SAM or BAM file input. (default = BED)
|the path to the genome sequence directory, which contains fasta files by chromosomes
|the width of the k-mers
--k_min [n] --k_max [n]
|minimum and maximum value of k
|the seed k-mer to jump start k-mer set discovery. Exact k-mer sequence only. The width of the seed k-mer will be used to set k
|the number of top ranking events to get sequences for motif discovery (default=5000)
|the sequence window size around the binding event for motif discovery (default=61bp)
|noise distribution model, 0 for no noise model, 1 for uniform noise model (default=1)
|The path to a genome information file (chrom.sizes file). The file
contains tab-delimited chromosome name/length pairs. If it is not
supplied, GEM will use the maximum value of read coordinate as the
|The size of uniquely mappable genome. It depends on the genome and the read length. A good estimate is genome size * 0.8. If it is not supplied, it will be estimated using the genome information.
|Fold cutoff to filter predicted events (default=3)
|IP/Control Ratio. Default ratio will be estimated from the data using non-specific binding regions. It is important to set this value explicitly for synthetic dataset.
|Output file base name
|significance level for q-value, specified as
-log10(q-value). For example, to enforce a q-value threshold of 0.001,
set this value to 3. (default=2, i.e. q-value=0.01)
|minimum alpha value for sparse prior (default is estimated by mean whole genome read coverage)
|a constant to scale alpha value with read count
(default=3). A smaller af value will give a larger alpha value.
|Shape deviation cutoff to filter predicted events
|The width (bp) to smooth the read distribution.
If it is set to -1, there will be no smoothing (default=30).
--subs [region strings]
|Subset of genome regions to be analyzed.The
string can be in the format of "chr:start-end" or "chr", or both. For
example, "1:003-1004 2 X".
--subf [region file]
|File that contains subset of genome regions to be
analyzed. Each line contains a region in "chr:start-end" format.
--ex [region file]
|File that contains subset of genome regions to be
excluded. Each line contains a region in "chr:start-end" format.
|Number of threads to run GEM in paralell. It is suggested to be equal to or less than the physical CPU number on the computer. (default: physical CPU number)
|Number of top ranked GEM events to be used for re-estimating the read distribution (default=2000). Note that GEM only re-estimate
when there are more than 500 significant events called.
|Size of sliding window to estimate lambda
parameter for Possion distribution when there is no control data
(default=5,000, must be larger than 1000).
|Size of sliding window to esitmate lambda
parameter for Possion distribution when there is no control data
(default=10,000, must be larger than w2).
|Use di-nucleotide shuffled sequences as negative sequences for motif finding
Base filtering is done by Poisson filtering by default.
|GEM will use a fixed user-specified alpha value
for all the regions
|Print help information and exit
To run GEM in multi-condition mode, you only need to specify data for
conditions X and Y using --exptX and --exptY, etc.
|Do not filter predicted events (default is to perform event filtering by shape and fold)
|Do not filter duplicate reads (i.e. potential PCR duplicates) (default is to apply filtering considering the read counts at its neighboring bases)
|Output narrowPeak files (default is NO narrowPeak file output)
|Output BED files for Genome Browser (default is NO BED file output)
|Sort GEM output by location (default is sorted by P-value)
Some best practices?
Can GEM/GPS process paired-end data?
- For each GEM result set, create a folder with the same name as
--out. Then run GEM within this folder. This will be useful if later you need to write scripts to process multiple GEM results.
- After each GEM run, check the PNG image file that plot all the read distribution curves (xxx_All_Read_Distributions.png). If the estimated curves are not smooth, you may have too few binding events to estimate from.
- If you get something unexpected (or an error), check the command line options, make sure that each option starts with "--", and there is a space between each option/value pair.
Yes. As version 2.4, GEM/GPS can process paired-end SAM/BAM format data (using the same
--f SAM option) by treating each mate-pair as two single-end reads. This works well, but it is not optimal. We are developing a new version that explicitly models the paired-end data, which should give more accurate results.
What if GEM finds wrong motif?
Clearly, GEM's binding call accuracy is depending on finding the correct primary motif. Some times a co-factor motif may be more statistically significant in the data, and it is subsequently used to direct the binding calls. There are several alternative options to try:
- If you know the consensus motif of the TF, use
--seed option to set a starting k-mer for the motif discovery process.
- You may want to try some different
k values, or different sequence window size
- Try to use a different negative sequence set, for example
--k_neg_dinu_shuffle option will use di-nucleotide shuffled sequences as negative set, instead of the default set taking from 300bp away from binding sites. This may be useful for TF that binds in CG-rich promoter regions (e.g. SP1).
Which round of result should I use?
Because of the read distribution re-estimation, GEM may output event prediction and read distribution files for multiple rounds. The round numbers are coded in the file name. For example,
to the large variability of datasets, the refined empirical spatial
distribution may become too noisy because too few events are used to
estimate the distribution. Running GEM further may make the empirical
distribution even worse. Therefore, GEM save the output files from each
round, and allow the user to check the spatial distributions to decide
which one is the best. To facilitate this process, GEM outputs an image
to plot all the read distribution curves
(xxx_All_Read_Distributions.png). Ideally, the read distribution of
later rounds should be smooth and similar to that of round 0. If so,
user can use the event predictions from these rounds. If that is not
the case, we would suggest to use the round 0 prediction results.
- xxx_0_Read_distribution.txt: The input read distribution.
- xxx_0_GEM_events.txt: GPS Events predicted using xxx_0_Read_distribution.
- xxx_1_Read_distribution.txt: The read distribution estimated from xxx_0_GEM_events.
- xxx_1_GEM_events.txt: GPS Events predicted using xxx_1_Read_distribution.
- xxx_2_GEM_events.txt: GEM Events predicted using xxx_2_Read_distribution.
Multi-condition v.s. Multi-replicates
GEM can analyze binding data from multiple conditions (time points)
simultaneously. The user need to give them different names, for
-–exptCond1 CTCF_cond1.bed -–exptCond2
For multiple replicates of same condition, you can specify multiple
replicates as separate files, for example,
-–exptCond1 CTCF_cond1_rep1.bed -–exptCond1
CTCF_cond1_rep2.bed (note that they need to have the same
name). GEM will combine the replicates as one large dataset for
Read filtering and event filtering
PCR amplification artifacts typically manifest as the observation of
many reads mapping to the exact same base positions. These artifacts
are quite variable and dataset-specific. Therefore, a generic approach
to exclude those regions might result in the loss of true events.
GEM implements an event filtering method by comparing the read
distribution of the predicted event to the expected event read
distribution. A shape deviation score (IPvsEMP field) is computed using
Kullback–Leibler divergence (see method section 2.6 of GPS paper). A
higher score means the event is more divergent from the expected read
distribution, hence more likely to be artifact or noise. A cutoff score
can be specified by user to filter out spurious events using option (
GEM also excludes events with less than 3 fold enrichment (IP/Control). GEM
reports the filtered events, hence allows the user to verify and adjust
cutoff threshold for a particular dataset. The shape deviation filter
is on by default, but can be turned off using option (
In addition, GEM also applies a Poisson filter for abnormal high read count at a base position. For each base, we obtain an average read count by estimating a Gaussian Kernel density (with std=20bp) on the read counts of nearby base positions (excluding the base of interest). The estimated value is used to set Lambda parameter of Poisson distribution. The actual read count value is then set to the value corresponding to p-value=0.001 if it is larger.
Contact Yuchun Guo (yguo at mit dot edu) with any problems, comments, or suggestions.
Sign up for GPS
mailing list to receive emails related to GEM/GPS updates,
This software is for research use only.